NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列
NetApp 存储服务器FAS8000系列
  • NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列


NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives
2.Maximum capacity 86PB
3.Maximum Flash Pool capacity: 864TB.4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 1536GB      

SAN horizontal expansion 1 8 nodes (4 HA pairs)
1.Maximum number of drives 4880
2.Maximum capacity 28PB
3.Maximum Flash Pool capacity 288TB
4.Maximum original capacity: pure flash memory 1.5PB
5.Maximum memory 512GB
6.Cluster interconnect 2 or 4 10 GbE.

Per HA pair specification (active-active dual controller)
1.Maximum capacity: 7200TB
2.Maximum Flash Pool capacity 72TB
3.Maximum pure flash FAS capacity: 384TB  
4.Maximum number of drives 1200Controller profile specification double chassis high availability
5.Two 6U cases are equipped with 2 controllers and 2 IOXM, a total of 12U.Or high availability in a single case. A 6U case has two controllers.
6. 128 gb of memory.
7.Maximum Flash Cache capacity 8TB
8.Maximum Flash Pool capacity 72TB
9.Total flash storage 72TB
10.NVRAM 16GB
11.PCIE expansion slots 8 or 24
12.On board I/O:UTA2 8 (10GbE/FCoE 16GB FC)
13.On-board I/O:10 GbE 8
14.On-board I/O:GbE 8
15.I/O on board :6 Gb SAS 8
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster.
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)Supported operating system: Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX;Number of SAN hosts supported: 8192

联系我们 发送询盘

产品详情
产品参数
询盘
NAS横向扩展 124个节点(12HA对)
1.最大驱动器数量:14400
2.最大容量:86PB
3.最大FlashPool™容量:864TB 
4.最大纯闪存FAS容量:4.6PB
5.最大内存:1536GB

SAN横向扩展 18个节点(4HA对)
1.最大驱动器数量:4880
2.最大容量:28PB
3.最大FlashPool™容量:288TB 
4.最大原始容量:纯闪存 1.5PB 
5.最大内存:512GB
6.集群互连:2个或410GbE

每个HA对的规格(主动-主动双控制器)
1.最大容量:7200TB
2.最大FlashPool容量:72TB
3.最大纯闪存FAS容量:384TB
4.最大驱动器数量:1200
5.控制器外形规格:双机箱高可用性;两个6U机箱中装有2个控制器和2IOXM,共12U;或者单机箱高可用性,一个6U机箱中装有2个控制器
6.内存:128GB
7.最大FlashCache™容量:8TB
8.最大FlashPool容量:72TB
9.总闪存量:72TB
10.NVRAM16GB
11.PCIe扩展插槽数:824
12.板载IO UTA2 810GbEFCoE16GbFC 
13.板载IO 10GbE 8
14.板载IO GbE 8
15.板载IO 6GbSAS 8
16.支持的存储网络:FCFCoEiSCSINFSpNFSCIFSSMBHTTPFTP
17.操作系统版本:DataONTAP8.2.1RC2或更高版本
18.高可用性功能:备用控制路径(ACP);基于以太网的服务处理器和DataONTAP管理界面;冗余热插拔控制器、散热风扇、电源和光学器件
19.支持的配置:
DataONTAP8.2.x集群模式DataONTAP配置 单节点集群双节点无交换机或有交换机集群
HA对集群
7-模式配置 单控制器
主动-主动控制器,带有控制器容错和多路径HA存储功能
7-模式MetroCluster™配置 
主动-主动控制器,带有延伸型(非交换存储)MetroCluster
主动-主动控制器,带有光纤连接(交换存储)MetroCluster
20.支持的配置:DataONTAP8.3
集群模式DataONTAP配置 单节点集群
双节点无交换机或有交换机集群 HA对集群
MetroCluster集群模式DataONTAP配置 2个双节点有交换机或无交换机集群,带有光纤连接(有交换机)存储;共4个节点 每个站点各有一个双节点主动-主动集群
21.支持的磁盘架:
DS22462U24个驱动器,2.5英寸SFF 
DS42464U24个驱动器,3.5英寸LFF 
DS44864U48个驱动器,3.5英寸LFF 
只支持升级DS42434U24个驱动器,3.5英寸LFF 
只支持升级DS14磁盘架(mk2-ATmk4 
22.最大RAID组大小:
RAID6(RAIDDP®) 
高性能磁盘 2826个数据磁盘加2个奇偶校验磁盘)
大容量磁盘 2018个数据磁盘加2个奇偶校验磁盘)
RAID4 
高性能磁盘 1413个数据磁盘加1个奇偶校验磁盘)
大容量磁盘 76个数据磁盘加1个奇偶校验磁盘)
RAID6+RAID1RAID4+RAID1(SyncMirror®)
23.支持的操作系统:Windows®2000WindowsServer®2003WindowsServer2008WindowsServer2012WindowsXPLinux®Oracle®SolarisAIXHP-UXMac®OSVMware®ESX®LUN
24.支持的SAN主机数量:8192
NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives
2.Maximum capacity 86PB
3.Maximum Flash Pool capacity: 864TB.4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 1536GB      

SAN horizontal expansion 1 8 nodes (4 HA pairs)
1.Maximum number of drives 4880
2.Maximum capacity 28PB
3.Maximum Flash Pool capacity 288TB
4.Maximum original capacity: pure flash memory 1.5PB
5.Maximum memory 512GB
6.Cluster interconnect 2 or 4 10 GbE.

Per HA pair specification (active-active dual controller)
1.Maximum capacity: 7200TB
2.Maximum Flash Pool capacity 72TB
3.Maximum pure flash FAS capacity: 384TB  
4.Maximum number of drives 1200Controller profile specification double chassis high availability
5.Two 6U cases are equipped with 2 controllers and 2 IOXM, a total of 12U.Or high availability in a single case. A 6U case has two controllers.
6. 128 gb of memory.
7.Maximum Flash Cache capacity 8TB
8.Maximum Flash Pool capacity 72TB
9.Total flash storage 72TB
10.NVRAM 16GB
11.PCIE expansion slots 8 or 24
12.On board I/O:UTA2 8 (10GbE/FCoE 16GB FC)
13.On-board I/O:10 GbE 8
14.On-board I/O:GbE 8
15.I/O on board :6 Gb SAS 8
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster.
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)Supported operating system: Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX;Number of SAN hosts supported: 8192

从供应商那里获得准确报价的提示。请在查询中包括以下内容:
1. 个人或业务信息
2. 详细提供产品要求
3. 最小起订量,单价等查询



请确保您的联系信息正确。您的消息将直接发送给收件人,并且不会公开显示。未经您的明确许可,我们绝不会将您的个人信息分发或出售给第三方。