NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列
NetApp 存储服务器FAS8000系列
  • NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列


NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives
2.Maximum capacity 51PB
3.Maximum Flash Pool capacity 576TB 4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 768GB SAN horizontal expansion 1 8 nodes (4 HA pairs) 1.Maximum number of drivesMaximum capacity 17PB 3.Maximum Flash Pool capacity 192TB 4.Maximum original capacity: pure flash memory 1.5PB 5.Maximum memory 256GB
6.Cluster interconnect 2 or 4 10 GbE per HA pair specification (active-active dual controller) 1.Maximum capacity 4320TB 2.Maximum Flash Pool capacity 48TB 3.Maximum pure flash FAS capacity: 384TBMaximum number of drives 720 5.High availability of single chassis. Two controllers are installed in a 6U chassis.
7.64 gb of memory.Maximum Flash Cache capacity 4TB
8.Maximum Flash Pool capacity 48TB
9.Total flash storage 48TB
10. NVRAM 16GB
11. PCIe expansion slots 8
12.On board I/O:UTA2 8 (10GbE/FCoE 16GB FC)
13.On-board I/O:10 GbE 8
14.On-board I/O:GbE 8
15.I/O on board :6 Gb SAS 8
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)Supported operating system: Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX;Number of SAN hosts supported: 8192

联系我们 发送询盘

产品详情
产品参数
询盘
NAS 横向扩展 124 个节点(12 HA 对)
1.最大驱动器数量:8640
2.最大容量:51PB
3.最大 Flash Pool™ 容量:576TB 
4.最大纯闪存 FAS 容量:4.6PB
5.最大内存:768GB

SAN 横向扩展 18 个节点(4 HA 对)
1.最大驱动器数量:2880
2.最大容量:17PB
3.最大 Flash Pool™ 容量:192TB 
4.最大原始容量:纯闪存 1.5PB 
5.最大内存:256GB
6.集群互连:2 个或410 GbE

每个HA对的规格(主动-主动双控制器)
1.最大容量:4320TB
2.最大 Flash Pool 容量:48TB
3.最大纯闪存 FAS 容量:384TB
4.最大驱动器数量:720
5.控制器外形规格:单机箱高可用性,一个 6U 机箱中装有 2 个控制器
6.内存:64GB
7.最大 Flash Cache™ 容量:4TB
8.最大 Flash Pool 容量:48TB
9.总闪存量:48TB
10.NVRAM16GB
11.PCIe 扩展插槽数:8
12.板载 I/OUTA2 810GbE/FCoE16 Gb FC
13.板载 I/O10 GbE 8
14.板载 I/OGbE 8
15.板载 I/O6 Gb SAS 8
16.支持的存储网络:FCFCoEiSCSINFSpNFSCIFS/SMBHTTPFTP
17.操作系统版本:Data ONTAP 8.2.1 RC2 或更高版本
18.高可用性功能:备用控制路径 (ACP);基于以太网的服务处理器和 Data ONTAP 管理界面;冗余热插拔控制器、散热风扇、电源和光学器件
19.支持的配置:
Data ONTAP 8.2.x 集群模式 Data ONTAP 配置 单节点集群 双节点无交换机或有交换机集群 HA 对集群
7-模式配置 单控制器
主动-主动控制器,带有控制器容错和多路径 HA 存储功能
7-模式 MetroCluster™ 配置 
主动-主动控制器,带有延伸型(非交换存储)MetroCluster
主动-主动控制器,带有光纤连接(交换存储)MetroCluster
20.支持的配置:
Data ONTAP 8.3 集群模式 Data ONTAP 配置 单节点集群 双节点无交换机或有交换机集群
HA 对集群 MetroCluster 集群模式 Data ONTAP 配置 2个双节点有交换机或无交换机集群,带有光纤连接(有交换机)存储;共4个节点 每个站点各有一个双节点主动-主动集群
21.支持的磁盘架:
DS22462U24 个驱动器,2.5 英寸 SFF 
DS42464U24 个驱动器,3.5 英寸 LFF 
DS44864U48 个驱动器,3.5 英寸 LFF 
只支持升级 DS42434U24 个驱动器,3.5 英寸 LFF 
只支持升级 DS14 磁盘架(mk2-ATmk4 
22.最大 RAID 组大小:
RAID 6 (RAID DP®) 
高性能磁盘 2826 个数据磁盘加 2 个奇偶校验磁盘)
大容量磁盘 2018 个数据磁盘加 2 个奇偶校验磁盘)
RAID 4 
高性能磁盘 1413 个数据磁盘加 1 个奇偶校验磁盘)
大容量磁盘 76 个数据磁盘加 1 个奇偶校验磁盘)
RAID 6 + RAID 1 RAID 4 + RAID 1 (SyncMirror®)
23.支持的操作系统:Windows® 2000Windows Server® 2003Windows Server 2008Windows Server 2012Windows XPLinux®Oracle® SolarisAIXHP-UXMac® OSVMware®ESX®LUN
24.支持的 SAN 主机数量:8192
NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives
2.Maximum capacity 51PB
3.Maximum Flash Pool capacity 576TB 4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 768GB SAN horizontal expansion 1 8 nodes (4 HA pairs) 1.Maximum number of drivesMaximum capacity 17PB 3.Maximum Flash Pool capacity 192TB 4.Maximum original capacity: pure flash memory 1.5PB 5.Maximum memory 256GB
6.Cluster interconnect 2 or 4 10 GbE per HA pair specification (active-active dual controller) 1.Maximum capacity 4320TB 2.Maximum Flash Pool capacity 48TB 3.Maximum pure flash FAS capacity: 384TBMaximum number of drives 720 5.High availability of single chassis. Two controllers are installed in a 6U chassis.
7.64 gb of memory.Maximum Flash Cache capacity 4TB
8.Maximum Flash Pool capacity 48TB
9.Total flash storage 48TB
10. NVRAM 16GB
11. PCIe expansion slots 8
12.On board I/O:UTA2 8 (10GbE/FCoE 16GB FC)
13.On-board I/O:10 GbE 8
14.On-board I/O:GbE 8
15.I/O on board :6 Gb SAS 8
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)Supported operating system: Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX;Number of SAN hosts supported: 8192

从供应商那里获得准确报价的提示。请在查询中包括以下内容:
1. 个人或业务信息
2. 详细提供产品要求
3. 最小起订量,单价等查询



请确保您的联系信息正确。您的消息将直接发送给收件人,并且不会公开显示。未经您的明确许可,我们绝不会将您的个人信息分发或出售给第三方。