NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列
NetApp 存储服务器FAS8000系列
  • NetApp 存储服务器FAS8000系列

NetApp 存储服务器FAS8000系列


NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives 5760
2.Maximum capacity 34PB
3.Maximum Flash Pool capacity 288TB 4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 576GB

SAN horizontal expansion 1 8 nodes (4 HA pairs)
1.Maximum number of drives 1920
2.Maximum capacity 11.5PB
3.Maximum Flash Pool capacity 96TB
4.Maximum original capacity: pure flash memory 1.5PB
5.Maximum memory 192GB
6.Cluster interconnect 2 10 GBES per

HA pair specification (active-active dual controller)
1.Maximum capacity 2880TB
2.Maximum Flash Pool capacity 24TB
3.Maximum pure flash FAS capacity: 384TB
4.Maximum number of drives
5.High availability of single chassis.
6.Two controllers are installed in a 3U chassis.48 gb memory
7.Maximum Flash Cache capacity 3TB
8.Maximum Flash Pool capacity 24TB
9.Total flash storage 24TB
10. NVRAM 8GB
11. PCIe expansion slots 4.On board
12.I/O:UTA2 4 (10GbE/FCoE 16GB FC)On-board
13.I/O:10 GbE 4
14.On-board I/O:GbE 4
15.I/O on board :6 Gb SAS 4
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)The operating system supported is Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX.Number of SAN hosts supported: 8192

联系我们 发送询盘

产品详情
产品参数
询盘
NAS 横向扩展 124 个节点(12 HA 对)
1.最大驱动器数量:5760
2.最大容量:34PB
3.最大:Flash Pool™ 容量 288TB 
4.最大纯闪存:FAS 容量 4.6PB
5.最大内存:576GB

SAN 横向扩展 18 个节点(4 HA 对)
1.最大驱动器数量:1920
2.最大容量:11.5PB
3.最大Flash Pool™ 容量:96TB 
4.最大原始容量:纯闪存 1.5PB 
5.最大内存:192GB
6.集群互连:2 10 GbE

每个 HA 对的规格(主动-主动双控制器)
1.最大容量:2880TB
2.最大 Flash Pool 容量:24TB
3.最大纯闪存 FAS 容量:384TB
4.最大驱动器数量:480
5.控制器外形规格:单机箱高可用性,一个 3U 机箱中装有 2 个控制器
6.内存:48GB
7.最大 Flash Cache™ 容量:3TB
8.最大 Flash Pool 容量:24TB
9.总闪存量:24TB
10.NVRAM8GB
11.PCIe 扩展插槽数:4
12.板载 I/OUTA2 410GbE/FCoE16 Gb FC
13.板载 I/O10 GbE 4
14.板载 I/OGbE 4
15.板载 I/O6 Gb SAS 4
16.支持的存储网络:FCFCoEiSCSINFSpNFSCIFS/SMBHTTPFTP
17.操作系统版本:Data ONTAP 8.2.1 RC2 或更高版本
18.高可用性功能:备用控制路径 (ACP);基于以太网的服务处理器和 Data ONTAP 管理界面;冗余热插拔控制器、散热风扇、电源和光学器件
19.支持的配置:Data ONTAP 8.2.x 
 集群模式 Data ONTAP 配置:单节点集群 双节点无交换机或有交换机集群 HA 对集群
7-模式配置: 单控制器 主动-主动控制器,带有控制器容错和多路径 HA 存储功能
7-模式MetroCluster™配置:
主动-主动控制器,带有延伸型(非交换存储)MetroCluster
主动-主动控制器,带有光纤连接(交换存储)MetroCluster
 20.支持的配置:Data ONTAP 8.3
集群模式 Data ONTAP 配置:单节点集群  双节点无交换机或有交换机集群 HA 对集群
MetroCluster 集群模式 Data ONTAP 配置:
2个双节点有交换机或无交换机集群,带有光纤连接(有交换机)存储;共 4 个节点:每个站点各有一个双节点主动-主动集群
  1. 支持的磁盘架:
DS22462U24 个驱动器,2.5 英寸 SFF 
DS42464U24 个驱动器,3.5 英寸 LFF 
DS44864U48 个驱动器,3.5 英寸 LFF 
只支持升级 DS42434U24 个驱动器,3.5 英寸 LFF 
只支持升级 DS14 磁盘架(mk2-ATmk4 
22.最大 RAID 组大小:
 RAID 6 (RAID DP®)
高性能磁盘:2826 个数据磁盘加 2 个奇偶校验磁盘)
大容量磁盘:2018 个数据磁盘加 2 个奇偶校验磁盘)
RAID 4
高性能磁盘:1413 个数据磁盘加 1 个奇偶校验磁盘)
大容量磁盘:76 个数据磁盘加 1 个奇偶校验磁盘)
RAID 6 + RAID 1 RAID 4 + RAID 1 (SyncMirror®)
23.支持的操作系统:
Windows® 2000Windows Server® 2003Windows Server 2008Windows Server 2012Windows XPLinux®Oracle® SolarisAIXHP-UXMac® OSVMware®ESX®LUN 数量
24.支持的 SAN 主机数量:8192
NAS horizontal expansion 1 24 nodes (12 HA pairs)
1.Maximum number of drives 5760
2.Maximum capacity 34PB
3.Maximum Flash Pool capacity 288TB 4.Maximum FAS capacity of pure flash memory
4.6PB
5.Maximum memory 576GB

SAN horizontal expansion 1 8 nodes (4 HA pairs)
1.Maximum number of drives 1920
2.Maximum capacity 11.5PB
3.Maximum Flash Pool capacity 96TB
4.Maximum original capacity: pure flash memory 1.5PB
5.Maximum memory 192GB
6.Cluster interconnect 2 10 GBES per

HA pair specification (active-active dual controller)
1.Maximum capacity 2880TB
2.Maximum Flash Pool capacity 24TB
3.Maximum pure flash FAS capacity: 384TB
4.Maximum number of drives
5.High availability of single chassis.
6.Two controllers are installed in a 3U chassis.48 gb memory
7.Maximum Flash Cache capacity 3TB
8.Maximum Flash Pool capacity 24TB
9.Total flash storage 24TB
10. NVRAM 8GB
11. PCIe expansion slots 4.On board
12.I/O:UTA2 4 (10GbE/FCoE 16GB FC)On-board
13.I/O:10 GbE 4
14.On-board I/O:GbE 4
15.I/O on board :6 Gb SAS 4
16.Supported storage network FC FCoE iSCSI NFS pNFS CIFS/SMB HTTP FTP
17.Operating system version Data ONTAP 8.2.1 RC2 or later
18.High availability function alternate control path (ACP);Ethernet based service processor and Data ONTAP management interface;Redundant waste heat cooling fan power supply plug controller and optics
19. Support the configuration of Data ONTAP 8.2 x cluster pattern Data ONTAP configuration: no single node cluster node or have switch cluster HA 7 - model for cluster configuration: single controller active - active controller, a fault-tolerant controller and multipath HA 7 - storage function mode MetroCluster configuration:Active-active controller with extended-type (non-switched storage)MetroCluster Active-Active controller with fiber optic connection (switched storage)MetroCluster
20.Data ONTAP configuration: Single-node cluster, double-node cluster with no switch or switch cluster HA Data ONTAP configuration: 2 double-node clusters with switch or no switch cluster, with optical fiber connection (with switch) storage;There are 4 nodes in total: each site has a two-node active-active cluster.Supported disk shelves.24 drives, 2.5-inch SFF)
21. DS4246(4U;24 drives, 3.5-inch LFF) DS4486(4U;48 drives, 3.5-inch LFF) only supports upgrade DS4243(4U;24 drives, 3.5-inch LFF) only supports upgrade of DS14 disk rack (MK2-AT mk4
22.Maximum RAID group size RAID 6 (RAID DP): High performance disks :28(26 data disks plus 2 parity disks) High capacity disks :20(18 data disks plus 2 parity disks) RAID 4:High performance disks :14(13 data disks plus 1 parity disk) High capacity disks :7(6 data disks plus 1 parity disk) RAID 6 + RAID 1 or RAID 4 + RAID 1 (SyncMirror)The operating system supported is Windows 2000, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Linux, Oracle, Solaris, AIX, HP-UX, Mac OS, VMware ESX.Number of SAN hosts supported: 8192

从供应商那里获得准确报价的提示。请在查询中包括以下内容:
1. 个人或业务信息
2. 详细提供产品要求
3. 最小起订量,单价等查询



请确保您的联系信息正确。您的消息将直接发送给收件人,并且不会公开显示。未经您的明确许可,我们绝不会将您的个人信息分发或出售给第三方。